Subject: Re: Solaris 8 ddp driver problem
From: Bruce Kropp (kropp@aracnet.com)
Date: Wed Sep 05 2001 - 13:35:54 EDT
Sure, I saw that two, and so I tried it in 32-bit mode
(using gcc/g++ 2.95 on Solaris 8 01/01). Both times
it compiled fine (64-bit, and 32-bit modes), but both
times I get the same message when running make kinstall:
add_drv -m '* 0666 root sys' ddp
devfsadm: driver failed to attach: ddp
Warning: Driver (ddp) successfully added to system but failed to attach
I have these entries in /etc/services:
rtmp 1/ddp
nbp 2/ddp
echo 4/ddp
zip 6/ddp
afpovertcp 548/tcp
afpovertcp 548/udp
and this /etc/netconfig entry:
ddp tpi_clts - appletalk ddp /dev/ddp -
but I've never seen the device /dev/ddp get
created automatically. So I hand created one
with my best guess (which could be a bad one):
/dev/ddp -> /devices/pseudo/ddp@0:ddp
Could you tell me what the device is supposed to
look like (I assume it is in /devices/pseudo/... ),
including major and minor numbers?
-bruce
Bruce Kropp
bruce@mail.thefourseasons.org
CSBURRIS@ci.tacoma.wa.us wrote:
>
> Well, I've tracked down the problem, but there is no good answer. It is
> actually documented in ./sys/solaris/Makefile.
>
> GCC doesn't currently do 64 bit compiles. 64-bit Sun Solaris requires
> 64-bit drivers. The only way to make it work is to use Sun C, which costs a
> cool $1300. The only solution is to beg one from some one who has the
> compiler and a similar architecture.
>
> I politely suggest (again) that a downloadable binary be placed on the
> sourceforge site or on SunFreeware. I've asked at each place.
>
> I received one myself, and have asked permission to re-distribute it, but
> have not received it yet.
>
> > ----------
> > From: Bruce
> > Sent: Monday, September 3, 2001 5:50 PM
> > To: netatalk
> > Subject: Solaris 8 ddp driver problem
> >
> > I've seen this question posed before, but have not seen an answer.
> > It applies to all these verions:
> >
> > netatalk-1.4.99-0.20001108.tar
> > netatalk-1.5pre6.tar
> > netatalk-971027.tar
> > netatalk-1.4b2+asun2.1.3.tar
> > pre-asun2.1.4-38b_test.tar
> >
> > in ./sys/solaris directory,
> > trying to run "make kinstall" on Solaris 8 (UltraSPARC-1),
> > produces the following error message (same in both 32-bit and 64-bit):
> >
> > ...
> > /usr/ucb/install -c ddp.conf /usr/kernel/drv/ddp.conf
> > add_drv -m '* 0666 root sys' ddp
> > devfsadm: driver failed to attach: ddp
> > Warning: Driver (ddp) successfully added to system but failed to
> > attach
> > sync;sync;sync
> > ...
> >
> > After setting atalkd.conf with hme0,
> > when atalkd is started, it produces the error message:
> >
> > can't establish STREAMS plumbing, exiting.
> >
> > /var/adm/messages says this about ioctl(fd, I_PUSH, "ddp") in
> > ./etc/atalkd/config.c:
> >
> > Sep 3 16:31:48 mail atalkd[12708]: [ID 174707 user.error] I_PUSH:
> > Invalid argument
> >
> > I had to guess at a device (is this documented? ), using:
> >
> > mknod /devices/psuedo/ddp@0:ddp c 92 1
> > ln -s /devices/psuedo/ddp@0:ddp /dev/ddp
> >
> > Any hints?
> >
> > -bruce
> > Bruce Kropp
> > bruce@mail.thefourseasons.org
> >
> >
> >
This archive was generated by hypermail 2b28 : Sun Oct 14 2001 - 03:04:51 EDT